Corridor — drone mission planner & footage mapper

⤓Route ▾

⤓

Drop route file

KML or KMZ · a single line = the alignment

Direction

➤Flight parameters ▾

Speed 12 m/s

Segment length 10 km

◉Camera settings ▾

Gimbal pitch −10°

Aircraft

◭Terrain & altitude ▾

Altitude above ground 30 m

Height reference

Terrain-follow (fetch elevation) slower · off = flat AGL

Alt max warning 120 m

⋮Waypoint & actions ▾

Waypoint spacing 250 m

Heading mode

Turn mode

Path between points

Corner radius (damping) 0 m

Finish action

On signal lost

Name time base 12:00

segment N shows as HH:NN — lets you separate projects (LGV vs ADM) on one RC

▤Advisory overlays ▾

Airports OurAirports Power lines colored by kV DJI-style airport zones approx

The DJI GEO button opens DJI's official Fly Safe map — the authoritative source for airport zones and no-fly areas — centered on your route. The overlays above are advisory only. Always confirm airspace in DJI Fly before flying.

✓Validation ▾

Generate a mission to see per-segment validation — waypoint counts, heights, and any altitude warnings.

⚙Generate & export ▾

Missions build in your browser — nothing is uploaded. Terrain from open elevation data. Names encode the segment (12:15:00 = C015) so they read correctly on the RC. Loading onto the controller needs the local companion.

Controller

Not connectedplug in over USB, then connect

Chrome or Edge only. Kill terminal adb first if it's running.

Missions to load

⤓

Drop .kmz files

or use the ones you generated in Plan

Generate missions in the Plan tab, or drop .kmz files above.

RC screen mirror

Click the screen image to tap the RC there. Type in the box to send text. Refreshes after each action so you can rename missions by hand.

🔬 Watch rename (diagnostic)

Captures what changes on the RC when you rename a mission in DJI Fly by hand — to find if the name is written anywhere we can reach. 1) Snapshot before, 2) rename in DJI Fly, 3) Snapshot after → see the diff + live log.

Loads directly over USB — no app to install. Only 3-waypoint placeholder missions get overwritten; real missions are left alone. Placeholders are created once by hand in DJI Fly (that step can't be automated). Names show as their time code (12:15:00 = C015).

⌖

Drop a route file to begin.

The alignment renders here; segments appear as you generate.

⇄

Connect the controller to load missions over USB.

The browser talks to the RC directly. Force-stops DJI Fly, writes each mission into a placeholder slot, then restarts the app so they appear — the same steps the loader script runs, without leaving the page.

◎

Drop .SRT logs to map your footage.